Table of Contents
Advertisement
INSTALLATION
3.8
ATTACHING KICK PLATES
On patch or crown end kickplates, cut the profile seal
in a 45
angle in order to attach it to the bottom of the
0
front kickplate panel.
FIGURE 3X
Attach the profile seal to the bottom of the front
kickplate panel.
PAGE 23
Kick Plate Support
FIGURE 3W
This front kickplate ajdustment bracket will be screwed
onto the support assembly.
Kick plate Support
Attach the front kickplate panel to the kickplate support
bracket by hooking the slot onto top of the bracket. This
will allow the kickplate to slide vertically to allow for a
slight variation in height.
FIGURE 3Y
SMED SEMI VERTICAL - HUSSMANN
FIGURE 3Z
Advertisement
Table of Contents
