Table of Contents
Advertisement
APPENDIX
7.2
APPENDIX 2 - Risk Analysis
Ergonomic - Stretching during the cleaning of the case
and positioning of stock and shelves leading to strains
Slipping - Surfaces may become slippery due to spillage
from the case during operation or cleaning
Cuts and stabbing - Potential for cuts caused by
sharp edges & evaporator coil during cleaning
Cuts and stabbing - Cleaning cold glass surfaces
with hot water
Crushing - fingers, hands or body between doors
Electrical -electrical connections in cases
Cuts and stabbing - Potential for cuts caused by dam-
aged or missing parts
PAGE 37
HAZARD
and sprains
CONTROL MEASURES
Request a service call. Electrically isolate cases before works
Staff must be trained in the correct procedures for setting up
cases and ergonomic practices. PPE must be worn
Use of barriers & fall arrest systems as appropriate & in ac-
cordance with State & Territory Legislation. Safe working at
heights
Electrically isolate cases before work is carried out. Staff
training,
Electrically isolate cases before work is carried out. Staff train-
ing, RCD. Keep electrical connections dry at all times.
Staff must be trained in OH&S procedures. MUST not climb on
shelves or cases.
Visual Inspection and regular maintenance. Request service
call when necessary. PPE must be worn when handling broken
or damaged parts.
SMED SEMI VERTICAL - HUSSMANN
Advertisement
Table of Contents
