How To Use: Aqua Cleaning; How To Remove: Grill - AEG BER352110M User Manual

Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
The retaining pins on the telescopic
runners must point to the front.

11.4 How to use: Aqua Cleaning

This cleaning procedure uses humidity to
remove remaining fat and food particles from
the oven.
Step 1 Pour water into the cavity embossment:
200 ml.
Step 2
Set the function:
Step 3 Set the temperature to 90 °C.
Step 1 Turn off the oven and wait until it is cold
to clean it.
Remove the shelf supports.
Step 2 Grab the grill corners. Pull it forwards
against the spring pressure and out of
two holders. The grill folds down.
Step 3 Clean the oven ceiling with warm water,
a soft cloth and a mild detergent. Let it
dry.
Step 4 Install the grill in the opposite sequence.
Step 5 Install the shelf supports.
32 ENGLISH
Step 4
Step 5
Step 6

11.5 How to remove: Grill

.
1
2
Let the oven work for 30 min.
Turn off the oven.
Wait until the oven is cold. Dry the cavi‐
ty with a soft cloth.
WARNING!
There is a risk of burns.