NEC UNIVERGE DT920 Series User Manual page 39

18.
The default file name will be displayed.
For the music on hold and ringer tone, the channel of voice
output is monaural.
- When downloading a file for music on hold, the default
file name is "MOH.wav"
File
Codec
Format
G.711 µ-law
WAVE
8kHz
When changing the file name, go to 19.
When not changing the file name, go to 20.
19.
Press the BK soft key once to delete the default
file name and then enter a new file name by using
the digit keys.
■A maximum of 20 characters ("0-9", "A-Z", "a-z", "*", "#",
".", "-" or "_") can be entered as a file name.
■To delete an entered character, press the BK soft key.
20.
Press Enter key or the Exec soft key to start the
downloading process. While downloading a file,
the LCD displays "Downloading..." first and then
"Saving...".
Be sure not to turn OFF the terminal while "Saving..." is
displayed on the LCD.
.
Maximum
Ringing Time
Size
under 32
256 KB
seconds
21.
After the downloading process is completed, the
display changes as follows:
The display goes back to the Download Files screen with
the Exit soft key.
When the
"Downloading Failed!" is displayed on the LCD. Check to see
the following table and then retry.
Check Points
Download file is not placed in
the specified directory.
A different file name is specified
between the terminal and FTP/
TFTP/HTTPS server.
Incorrect IP address of
FTP/TFTP/HTTPS server has
been entered from the
telephone.
The power to
FTP/TFTP/HTTPS server or
network equipment is OFF.
LAN cable is disconnected.
39
TERMINAL SETUP
downloading process ends
Actions
Place the download file in the
specified directory.
Set the same file name to both
the terminal and FTP/
TFTP/HTTPS server.
Set the proper IP address of
FTP/TFTP/HTTPS server.
Reconnect the cable securely
Reconnect the cable securely.
in failure,