NEC UNIVERGE DT920 Series User Manual page 43

18.
Press the Enter key or the Exec soft key to start
restoring the backup data to the telephone. While
downloading the backup data, the LCD displays
"Downloading..." first and then "Saving...".
Be sure not to turn OFF the terminal while "Saving..." is
displayed on the LCD.
19.
After the downloading process is completed, the
display changes as follows:
The display goes back to the Backup/Restore
screen by the Exit soft key.
When the downloading process ends in failure, "Download
Failed!" is displayed on the LCD. Check to see the following
table and then make a retry.
Check Points
Download file is not placed
in the specified directory.
A different file name is
specified between the
terminal and FTP/TFTP/
HTTPS server.
Incorrect IP address of
FTP/TFTP/HTTPS server
has been entered from the
telephone.
The power to
FTP/TFTP/HTTPS server or
network equipment is OFF.
LAN cable is disconnected. Reconnect the cable securely.
Actions
Place the download file in the
specified directory.
Set the same file name to both the
terminal and FTP/TFTP/HTTPS
server.
Set the proper IP address of
FTP/TFTP/HTTPS server.
Turn on the power.
43
TERMINAL SETUP