Toshiba e-STUDIO 407CS Series Printing Manual page 111

2.PRINTING FROM WINDOWS
Inserting from the bypass tray
When the paper is being fed into the equipment
 Do not mix paper of different sizes.
 Place one sheet at a time on the bypass tray even if you wish to print multiple copies.
 Slightly curl the paper. Hold it gently as it is being fed into the equipment.
 Be careful not to cut your fingers on the edge of paper when you hold it.
 Make sure that the trailing edge of the paper will not be fed into the equipment while you are holding it.
 The paper will be printed with a resolution of 300 dpi.
When the paper is coming out of the equipment
 Hold the paper gently as it is coming out of the equipment.
 Be careful not to cut your fingers on the edge of paper when you hold it.
 Do not pull out the paper forcibly as it is exiting from the equipment.
2 PRINTING FROM WINDOWS
Printing With Best Functions for Your Needs 109