Toshiba e-STUDIO 407CS Series Printing Manual page 42

2 PRINTING FROM WINDOWS
4) Staple
This sets whether a print job is printed with staples.
- Upper Left — Select this to staple the printed document in the upper left.
 The selectable options vary depending on the paper size and orientation.
 The "Staple" option is available only when the Finisher is installed.
 The "Staple" option is not available when the Group Copies / Magazine sort function is selected.
 Stapling cannot be set when the following paper sizes are selected in the [Print Paper Size] box in the [Basic]
tab.
- Statement
- A5
- A6
- Postcard
- IndexCard 3x5''
- Custom Paper Size
- Envelope - Com9
- Envelope - Com10
- Envelope - Monarch
- Envelope - DL
- Envelope - CHO3
- Envelope - YOU4
- Envelope - C5
 Stapling cannot be set when the following paper types are selected at the [Paper Type] box in the [Basic] tab.
However, this may differ depending on whether the Finisher is installed.
- Thick 5
- Special 1
- Special 2
- Special 3
- Special 4
- Special 5
- Special 6
- Envelope 1
- Envelope 2
- Envelope 3
- Envelope 4
For detailed instructions on how to print with the [Staple] setting, see the following page:
 P.98 "Stapling"
5) Use Custom Margin
Select this check box to set the margin on the printed pages. When this box is selected, click [Details] to set the
margins in the [Custom Margin] dialog box: 0.17 inch to 3.94 inches / 4.2 mm to 100 mm (The margin width cannot be
smaller than 0.17 inches / 4.2 mm.)
 If [Booklet] is selected on [2-Sided Printing], this option will be disabled.
 Enable this function to add the margins if the application does not support the margin function. When the
application has a margin function, use the application's function rather than this option.
 This cannot specify the binding margin for Booklet printing.
40 Setting Up Print Options