Toshiba e-STUDIO 407CS Series Printing Manual page 76

2 PRINTING FROM WINDOWS
Customization: [PDL Settings] tab
The Printer Language setting is available only for the printer drivers below.
- Universal Printer 2
- Universal PS3
1) Output PDL
This selects the printer driver language (PDL) to be printed. The setting can be changed only when the Universal
Printer 2 printer driver is used. The setting is fixed to [PostScript] when the Universal PS3 printer driver is used.
- PCL6 — Select this to print in PCL6.
- PostScript — Select this to print in PostScript.
If [PostScript] is selected in the Universal Printer 2 printer driver, printing from an application by PostScript pass
through output cannot be performed. Since PostScript is generated via GDI, it is limited to the RGB color space. To
perform pass-through printing from applications which can directly generate PostScript such as Adobe Illustrator,
use the Universal PS3 printer driver.
2) Output Format
This selects an output format for PostScript printing. This setting can be changed only when [PostScript] is selected in
the [Output PDL] box.
- ASCII — A job is sent in ASCII format (enabling PostScript code editing with a text editor or a word processor).
- Encapsulated PostScript (EPS) — A job is printed as an image file in EPS format (for PostScript-compatible
printers).
- Using Adobe DSC — A job is sent in PostScript format that is optimized to reduce printing errors.
EPS format is usually used for creating images to be imported into a document. Therefore, only the first page of a
document can be printed when [Encapsulated PostScript (EPS)] is selected. Also the destination where the paper
should exit can be set only by the administrator. For the details, ask your administrator.
3) Print Error Information
This prints PostScript errors which occurred during printing. This setting can be changed only when [PostScript] is
selected in the [Output PDL] box.
4) Compress Bitmap
This sends the compressed bitmaps to this equipment. This setting is displayed only when the Universal Printer 2
printer driver is used. Also this setting can be changed only when [PostScript] is selected in the [Output PDL] box.
5) JPEG Compression
This sends compressed JPEG data to this equipment. This setting is displayed only when the Universal Printer 2
printer driver is used. Also this setting can be changed only when [PCL6] is selected in the [Output PDL] box.
6) Bold level
This adjusts the boldness level of characters. You can adjust the preferred level between 0.000 and 1.000. The default
value is "0.017".
74 Setting Up Print Options
1
2
3
4
5
6
7