Toshiba e-STUDIO 407CS Series Printing Manual page 136

3 PRINTING FROM Macintosh
2) Print Mode
This sets the type of print job.
- Normal — Select this to print a job normally.
- Proof — Select this to print the first copy of a multicopy job and then wait for approval before printing the remaining
copies. If a print job is sent as a proof job, one copy of the job is printed and the remaining copies are saved in the
proof job queue on this equipment, which are not printed until you activate printing from the touch panel display.
This option allows you to check the job's output before printing the remaining copies and thereby reduce paper
waste.
- Private — Select this to print a private job. When this is selected, specify the 5-digit password in the field next to
the box. The print job is saved in the private job queue on this equipment, and not printed until you activate printing
from the touch panel display of this equipment. This option is useful when you want to print a confidential document
secured with a password. The user has to enter the password to print the private job when activating printing from
the touch panel display.
- Hold — Select this option to print a hold job. The print job, sent as a hold job, is saved in the hold job queue on this
equipment. To perform printing, select the desired job on the touch panel display and press [PRINT]. This option is
useful to prevent you from forgetting to remove printed sheets.
3) Distinguish Thin Lines
Select this check box to print thin lines clearly.
4) Do not Print Blank Pages
Select whether you require blank pages to be printed.
 When more than 2 is selected at the [Page per Sheet] option in the Layout menu, the blank pages will be
printed.
 Pages with a header or footer will be printed even if the content is blank.
 Printer Features
In the Printer Features menu, you can set special printing features.
Finishing
In the Finishing menu, you can set the destination and stapling.
1
2
134 Printing From Application on Mac OS X 10.4.x to Mac OS X 10.8.x