Toshiba e-STUDIO 407CS Series Printing Manual page 68

2 PRINTING FROM WINDOWS
The [Custom Paper Size - Name] dialog box
4
1) Paper Size List
Select the custom paper size that you want to modify.
2) [Add]
Click this to display the [Custom Paper Size - Name] dialog box.
3) [Delete]
Click this to clear and restore the default settings of the selected custom paper size that you selected in the [Paper
Size List]. When you click this, the confirmation dialog box appears. Click [Yes] to delete the setting.
4) Name
Enter the custom paper size name. You can enter up to 63 characters. This name will be displayed in the [Original
Paper Size] and [Print Paper Size] box on the [Basic] tab.
5) Paper Size
Enter A (Length) and B (Width) to specify the paper size.
Select values within the range shown on the right of each.
6) Units
Select the unit for the paper size. The default unit varies depending on the regional setting in the Windows.
 To register a custom paper size, either A (Length) or B (Width) should differ by more than 0.3 inches (7 mm) from
the standard paper size. If not, the created custom paper size is considered as the standard paper size.
 You cannot create a custom paper size with A (Length) longer than B (Width). If you want to print such a document,
do so by selecting [landscape] for the [Orientation].
 There are some precautions when you use paper larger than the standard sizes. For details, see the following
page:
 P.108 "Printing on paper larger than standard sizes"
66 Setting Up Print Options
5
6