Table of Contents
Advertisement
LENS Button
Projector
1, 4a
3
2
4b
On-screen Display
(Example: 4:3
NORMAL image)
29
Remote Control
4b
1.2.3
4.5.6
On-screen Display
(Example: 16:9
WIDE image)
Digital Image Adjustments
This function can be used to adjust the focus, zoom,
lens
shift,
keystone
and
digital shift
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1
Press LENS to select mode. Each time LENS is
pressed, the screen changes as shown on the
left.
2
Press ENTER to display test
pattern.
3
∂/ƒ/ß/©
Press
to make
adjustments.
4
a. Press LENS until normal screen appears.
b. To reset the "KEYSTONE" and "DIGITAL SHIFT"
setting, press UNDO.
• At first when the button is pushed, "LENS SHIFT" function
moves slowly allowing for fine adjustments to be made.
Keep holding the button to move it faster.
• Straight lines and the edges of the displayed image may
appear jagged, when adjusting the KEYSTONE setting.
• Do not touch the lens when adjusting the focus or zoom.
• Digital shift function only works with BORDER, STRETCH
or SMART STRETCH of VIDEO and DTV inputs. (See page
34 for details.) The DIGITAL SHIFT screen is not displayed
when projecting images other than WIDE.
Digital Shift
Press ∂.
settings.
MOUSE
or
Press ƒ.
ADJ.
Advertisement
Table of Contents
