Reversing/Inverting Projected Images - Sharp XG-V10XE Operation Manual

Selecting the Economy Mode
Projector
1, 6
2, 3, 4
5
(GUI) On-screen Display

Reversing/Inverting Projected Images

Projector
1, 6
2, 3, 4
5
(GUI) On-screen Display
Remote Control
1.2.3 4.5.6
Remote Control
1.2.3 4.5.6
ID No. Display Off Function
The LED ID number display on the rear of the projector,
used when controlling multiple projectors, can be turned
on or off.
Description of ID No. Display
Selected item Description
Display Off Not displayed
Displayed except when the projector is
Standby Off
in standby mode.
Display On Always displayed
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options (1)".
3 Press ∂/ƒ to select "ID No. Display", and then
press ©.
4 Press ∂/ƒ to select "Display Off", "Standby
Off" or "Display On".
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.
Description of Projected Images
Selected item Description
Front Normal image
Ceiling Front Inverted image
Rear Reversed image
Ceiling Rear Reversed and inverted image
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options (2)".
3 Press ∂/ƒ to select "PRJ Mode", and then press
©.
4 Press ∂/ƒ to select the desired projection mode.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• This function is used for the reversed image and ceiling-
mount setups. See page 30 for these setups.
MOUSE ADJ.
MOUSE ADJ.
56