Selecting The Transmission Speed (Rs-232C) - Sharp XG-V10XE Operation Manual

Selecting the Transmission Speed (RS-232C)

Projector
1, 6
2, 3, 4
5
(GUI) On-screen Display
Remote Control
1.2.3 4.5.6
This menu allows you to adjust the transmission speed
of the RS-232C connection by selecting the baud rate.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options (2)".
3 Press ∂/ƒ to select "RS-232C", and then press
©.
4 Press ∂/ƒ to select the desired baud rate.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• Make sure that both the projector and computer are set
for the same baud rate. Refer to the computer's operation
manual for instructions for setting the baud rate.
MOUSE ADJ.
60