Table of Contents
Advertisement
Menu navigation
Menu navigation
Navigating through the menu
■
Operating procedure
Press
1)
Press the <
MENU> button on the remote
control or in the controls of the projector.
The main menu is displayed.
z
PICTURE
POSITION
LANGUAGE
OPTION
2)
Press the ▲▼ buttons to select main
menu items.
Select the item to be adjusted from the 4 items
z
[PICTURE], [POSITION], [LANGUAGE] and
[OPTION]. The selected item is indicated with a
yellow cursor, and the submenu is displayed on the
right hand side.
PICTURE
POSITION
LANGUAGE
OPTION
3)
Press the <ENTER> button.
The submenu is displayed, and submenu items
z
become selectable.
34 - ENGLISH
PICTURE MODE
NORMAL
CONTRAST
BRIGHTNESS
COLOUR
TINT
COLOUR TEMPERATURE
SHARPNESS
SIMPLE
DYNAMIC IRIS
ON
LIGHT HARMONIZER
WAVEFORM MONITOR
SPLIT ADJAST
ADVANCED MENU
PICTURE MEMORY
H-POSITION
V-POSITION
ASPECT
16:9
WSS
ON
OVER SCAN
KEYSTONE
SCREEN AREA MEMORY
4)
Press the ▲▼ buttons to select the
submenu item you wish to alter, then
press the
For items where the setting is switched or that have
z
a bar scale, the menu screen disappears and only
the selected item (individual adjustment screen) is
displayed, as shown in the diagram below.
H-POSITION
For items that are only names, pressing the
z
<ENTER> button displays the next screen and
advanced settings can be performed.
0
Note
0
0
Pressing the <RETURN> or <MENU> button when the
z
0
menu screen is displayed returns to the previous screen.
0
Depending on the signal input, some items may not be
z
adjustable and some functions may not be usable.
Some items can be adjusted even if a signal is not input.
z
See page
35 for the submenu items.
z
■ Returning adjusted values to default
settings
Press the <DEFAULT> button on the remote control
to return the settings/adjustment values to default
settings.
Press
This function differs depending on the screen
displayed.
●
When the submenu screen is displayed:
0
The submenu items displayed are returned to
0
their default settings.
●
When individual adjustment screen is displayed:
0
Only the item currently being adjusted is returned
0
to its default settings.
H-POSITION
Note
All settings cannot be simultaneously returned to default
z
settings.
Some items do not return to default settings even you
z
press the <DEFAULT> button. Please set those items
individually.
The vertical bar above the bar scale on the individual
z
adjustment screen indicates the default setting.
The position of the vertical bar varies depending on the
input signal.
to switch settings/adjust.
0
0
Default setting
0
Current setting
Advertisement
Chapters
Table of Contents
