Table of Contents
Advertisement
TEMP and LAMP Indicators
■ Lamp indicator <LAMP>
Indicator
status
Time to replace the lamp unit. Illuminates when
the lamp unit has reached its maximum usage
Problem
period of 1 800 hours (when [LAMP POWER]
is set to [NORMAL]).
A message suggesting lamp replacement
Cause
is displayed when power is turned on.
Solution
Replace the lamp unit. (
Note
If the <LAMP> indicator is illuminated or flashes despite taking the actions above, please contact an Authorized Service
z
Center to have your projector repaired.
72 - ENGLISH
Illuminated red
77)
page
Flashing red
Lamp circuit failure, abnormal function or lamp unit
is damaged.
The power may
have been turned on
immediately after being
turned off.
Let the lamp unit cool
down and turn on the
power.
Lamp circuit failure,
abnormal function or
lamp unit is damaged.
Press the <OFF> side
of the <MAIN POWER>
switch to turn off the
power as described
in the "Switching off
the power" procedure
(
page 29), and
contact your dealer.
Advertisement
Chapters
Table of Contents
