Table of Contents
Advertisement
■ POWER ON LINK]
[
Specify whether or not to switch the power of the projector
on when it is in standby by operating external devices.
Switch settings
[OFF]
Inactive
Switch projector power on along
[ON]
with external devices
Note
Depending on the external device, the projector may
z
automatically turn on when some functions of the
connected devices are used. (Only in standby)
Due to the projector's characteristics, it takes time
z
before projection begins. Please be aware that video
may already have started by the time the projector is
operating fully.
■ POWER OFF LINK]
[
Specify whether to switch the power off for external devices
when this projector is set to standby.
Switch settings
Switch the power of external
[ON]
devices off along with this
projector
Do not switch the power of
[OFF]
external devices off along with
this projector
Note
This function works even if the projector enters standby
z
mode automatically through the [SLEEP] function.
There are cases where some external devices may
z
not be switched off depending on their status (currently
recording etc.)
■ STANDBY POWER SAVE]
Switch settings
Switch settings
Note
z
z
■ INTELLIGENT AUTO STANDBY]
Switch settings
Switch settings
Note
z
[OPTION] menu
[
Specify whether or not to switch the mode of external
devices to the mode with minimum power consumption
when the projector is set to standby.
[OFF]
Do not switch
Switch the mode of external
[ON]
devices to the mode with
minimum power consumption
This function works when [POWER OFF LINK] is set to
[ON].
Depending on the external devices, when the projector
is turned on power consumption may increase even in
[STANDBY POWER SAVE] mode in order to achieve
faster start up.
[
Specify whether or not to keep the power on for external
devices selected for input and switch the power off for
external devices not selected for input.
If you select [ON (WITH REMINDER)], a message is
displayed before the function operates.
Maintain the power on state of
[OFF]
devices for which input is not
selected
After a confirmation message is
[ON (WITH
displayed, devices for which the
REMINDER)]
input is not selected are set to
standby mode
[ON (NO
Devices for which the input is not
REMINDER)]
selected are set to standby mode
This function may not work properly depending on the
external device.
Switch settings
Switch settings
ENGLISH - 69
Advertisement
Chapters
Table of Contents
