Table of Contents
Advertisement
[OPTION] menu
■ [SLEEP]
Set the time for the power to be automatically turned
off.
Switch settings
[OFF]
[60MIN.]
[90MIN.]
[120MIN.]
[150MIN.]
[180MIN.]
[210MIN.]
[240MIN.]
Note
The projector automatically enters power off preparation
z
mode (the power indicator illuminates orange), and then
enters standby mode (the power indicator illuminates or
flashes in red). (
3 minutes before turn-off, the number of minutes
z
remaining will be displayed in the lower right corner.
If [SLEEP] mode is set to [OFF] mode before the
z
specified time has elapsed the settings are erased.
[FUNCTION BUTTON]
Display the function currently assigned to the
<FUNCTION> button of the remote control. Also,
cancel the assigned function.
■
How to cancel function assignment
1)
Press the <ENTER> button.
The [FUNCTION BUTTON] confirmation message
z
is displayed.
FUNCTION BUTTON
FUNCTION BUTTON IS DISABLED.
OK
2)
Select [OK] with the ◄ ► buttons.
3)
Press the <ENTER> button.
Note
See "Using the <FUNCTION> button" in "Remote
z
control operation" regarding allocating operations to the
<FUNCTION> button. (
68 - ENGLISH
Switch settings
Inactive
Turn power off after 60 minutes
Turn power off after 90 minutes
Turn power off after 120 minutes
Turn power off after 150 minutes
Turn power off after 180 minutes
Turn power off after 210 minutes
Turn power off after 240 minutes
page 27)
CANCEL
page 33)
[VIERA LINK SETTINGS]
Configure VIERA Link.
Press the <ENTER> button.
The [VIERA LINK SETTINGS] confirmation
z
message is displayed.
VIERA LINK SETTINGS
PICTURE
VIERA LINK
POWER ON LINK
POSITION
POWER OFF LINK
STANDBY POWER SAVE
INTELLIGENT AUTO STANDBY
LANGUAGE
VERSION : HDAVI Control 5
OPTION
■ VIERA LINK]
[
Set whether the VIERA Link control is active.
Switch settings
[ON]
Active
[OFF]
Inactive
When [VIERA LINK] is [ON], the following settings can be
made.
[POWER ON LINK]
[POWER OFF LINK]
[STANDBY POWER SAVE]
[INTELLIGENT AUTO STANDBY]
ON
OFF
OFF
OFF
OFF
Switch settings
Advertisement
Chapters
Table of Contents
