Panasonic PT-AH1000E Operating Instructions Manual page 43

2) Press the ▲▼ buttons to select [Y ADJUST]
and then press the <ENTER> button.
The [Y ADJUST] menu is displayed and a
z
maximum of 9 points are adjustable.
Y ADJUST
0%
(A)
POINT 5 INPUT
Displays information about the current selected point
(A).
Default setting:
POINT [5] INPUT [50 %] OUTPUT [0]
Display the present selected point
number.
[POINT] Numbers 1 to 9 are displayed from
[1] to [9] the left of the input signal level.
Your selected point is indicated in
yellow on the graph.
Display the input level of the present
selected point.
[INPUT]
Setting range: from 1 to 99 % in
[1 %] to
increments of 1 %.
[99 %]
Default settings: 10, 20, 30, 40, 50,
60, 70, 80, 90 %
Display the output level of the present
[OUTPUT] selected point.
[-252] to Adjustable range depends on the
[+252] input level.
Default setting: 0
50% 100%
INPUT
50% OUTPUT 0
[PICTURE] menu
3) Adjust the tone with the ▲▼
<ENTER> button, <SUB MENU> button, or
<DEFAULT> button.
a. Changing the selected point
Using the remote control
z
The selection point moves one point to the right each
time the <SUB MENU> button is pressed. The default
setting is point 5.
Ex. 5 -> 6 ->...-> 9 -> 1 ->...
Y ADJUST
0%
POINT 5 INPUT
Y ADJUST
0%
POINT 6 INPUT
Using the device control
z
You can also change the [POINT] from the [GAMMA
ADJUSTMENT] menu directly.
Use ▲ ▼ to select [POINT] and ◄ ► to change the
point.
GAMMA ADJUSTMENT
PICTURE ADJUSTMENT MODE
GAMMA HIGH
POSITION GAMMA MID
GAMMA LOW
POINT
LANGUAGE
Y ADJUST
R ADJUST
OPTION
G ADJUST
GAMMA ADJUSTMENT
PICTURE ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
POSITION
GAMMA LOW
LANGUAGE POINT
Y ADJUST
R ADJUST
OPTION
G ADJUST
buttons,
50% 100%
INPUT
50% OUTPUT +10
50% 100%
INPUT
60% OUTPUT 0
ADVANCED
5
ADVANCED
6
ENGLISH - 43