Table of Contents
Advertisement
3 Display mode
Displays the types of the thumbnails to be displayed on the screen and the types of other information screens. To switch between displays, refer to
"Setting thumbnail screen display" (page 101).
[ALL]
[SAME FORMAT]
[SELECT]
[MARKER]
[TEXT MEMO]
[SLOT n]
[P2/REMAIN]
[P2/USED]
[META DATA]
4 Simple properties display
Displays the various properties of the clip on which the pointer is positioned. You can select the items to display from the menu. For details, refer to
"Properties" (page 108).
@
NOTE
t If the maximum number of characters is exceeded, it will only display the maximum number of characters that can be displayed.
5 Thumbnail
Displays the thumbnail recorded in each clip. You can change this thumbnail using the [EXCH. THUMBNAIL] function.
For details, refer to "Setting thumbnail screen display" (page 101).
6 Clip information display
By setting this item, displays either one of the time code [TC]/user bits [UB]/time of shooting [TIME]/date of shooting [DATE]/time and date of
shooting [DATE TIME]/clip name [CLIP NAME]/user clip name [USER CLIP NAME]/card slot number [SLOT]/time code of thumbnail [THUMBNAIL
TC] at the start of clip recording.
7 Recording mode
Displays the recording mode for the clip on which the cursor is positioned.
8 System format
Displays the format for the clip on which the cursor is positioned.
9 Duration
Displays the clip length (duration) at the cursor position and the current rough playback position against the clip length.
Playback position display is enabled when [RESUME] is selected in the main menu → [CLIP] → [THUMBNAIL SETUP] → [PB POSITION].
The approximate playback position is displayed when the playback start position is not at the beginning.
10 Number of selected clips
Shows the number of selected clips and the total number of clips.
11 Clip number
Displays the number assigned to the clip on the P2 card, normally in the order from the earliest recording date and time. The clip numbers of clips
that cannot be played are shown in red, and the unplayable indicator
For details, refer to "Setting thumbnail screen display" (page 101).
12
Shot mark indicator
Displayed for the clip of a thumbnail with a shot mark attached.
For details, refer to "Shot mark recording function" (page 69).
13
Indicator for clips with proxy
Displayed for clips with proxy attached.
14
Text memo indicator
Displayed for clips with text memo data attached.
15
Edit copied clip indicator
Displayed for the edit copied clip.
16
Wide clip indicator
Displayed for clips recorded with the 16:9 aspect ratio. However, it does not accompany clips in HD format.
17
Incomplete clip indicator
Displayed when clips are saved across multiple P2 cards and either of the P2 cards is not inserted in a card slot.
18
/
Defective clip indicator,
Displayed for defective clips, which may result from various causes such as turning off the power during recording.
Clips with yellow defective clip indicators can sometimes be restored.
For details, refer to "Restoring clips" (page 104).
Clips with red defective clip indicators cannot be restored and must be deleted. If the clip cannot be deleted, format the P2 card.
is displayed for clips which differ in format from the P2 standard.
19 Thumbnail scroll bar
Indicates which part of the whole thumbnail is currently being viewed.
Chapter 5 Playback — Thumbnail operations
Displays all clips.
Displays clips in the same format as the system format.
Displays clips selected with the control stick.
Displays clips with shot marks.
Displays clips with text memo data.
Displays clips in the specified P2 card. (n: slot numbers 1 to 3 are entered)
Displays the media information (remaining capacity).
Displays the media information (used capacity).
Displays the set metadata.
Unknown clip indicator
is also displayed.
– 100 –
Advertisement
Table of Contents
