Table of Contents
Advertisement
Chapter 8 Connecting to External Devices — Connecting with headphones, remote control, or TV/monitor
Connecting with headphones, remote control, or TV/monitor
Headphones
Headphones (optional) can be connected to the headphone terminal (3.5 mm stereo mini jack).
@
NOTE
t When headphones are connected, audio is not output from the speaker.
Remote control
Remote control (optional) can be connected to the <CAM REMOTE> terminals (<FOCUS IRIS>, <ZOOM S/S>).
When the remote control is connected to the <FOCUS IRIS> terminal (3.5 mm mini jack), you can remotely control the focus and iris operations.
When the remote control is connected to the <ZOOM S/S> terminal (2.5 mm super mini jack), you can remotely control the zoom and recording start/
stop operations.
@
NOTE
t Do not connect a device other than a remote control to the <CAM REMOTE> terminals. Connecting a device other than a remote control may change
the brightness or cause defocus of images.
TV/monitor
A TV or monitor can be connected as shown in the following figure.
@
NOTE
t VIERA Link is not supported on the camera. Please be aware that when using an HDMI cable and connecting this camera to a device that supports
VIERA Link, the VIERA Link of other devices may not work in some cases.
t SD signals (480i, 576i) output from the <HDMI OUT> terminal are converted to progressive signals (480P, 576P) then output.
t For the BNC cable (optional) connected to the <SDI OUT> terminal, prepare a double-shielded cable equivalent to 5C-FB.
Headphone terminal
<ZOOM S/S> terminal
<FOCUS IRIS> terminal
Audio cable (optional)
3.5 mm diameter jack-pin conversion cable
HDMI cable (optional)
BNC cable (optional)
BNC cable (optional)
– 149 –
TV/monitor
Advertisement
Table of Contents
