Table of Contents
Advertisement
2
Press the control stick.
The connection status is displayed.
3
After checking the log, press the <EXIT> button.
The setting menu screen returns.
@
NOTE
t The status information is not updated in real-time. To view the most recent data, perform the procedure again.
t If [ENABLE] is set in the main menu → [NETWORK SETUP] → [LAN PROPERTY] → [DHCP]/[DHCP SERVER] or in the main menu → [NETWORK
SETUP] → [WIRELESS PROPERTY] → [DHCP SERVER], IP address and other necessary information are assigned automatically.
t While the address information is being obtained from the setting in the main menu → [NETWORK SETUP] → [LAN PROPERTY] → [DHCP]/[DHCP
SERVER] or in the main menu → [NETWORK SETUP] → [WIRELESS PROPERTY] → [DHCP SERVER], the status information is not displayed
correctly.
t The default gateway is displayed as status information only when correctly set up.
t If only [SECONDARY DNS] is set without setting [PRIMARY DNS] for the network setting (wireless LAN, wired LAN), [DNS1] is displayed.
r Initializing network settings
1
Select [INITIALIZE] in the main menu → [NETWORK SETUP] → [NETWORK TOOL].
2
Press the control stick.
When initialization completes, the setting menu screen returns.
Chapter 9 Network Connection — Network settings
– 167 –
Advertisement
Table of Contents
