Selecting Thumbnails; Setting Thumbnail Screen Display - Panasonic AJ-PX270EJ Operating Instructions Manual

Panasonic memory card camera recorder
Table of Contents

Advertisement

Selecting thumbnails

Multiple thumbnails can be randomly selected on the thumbnail screen.
Selecting clips
You can select multiple clips randomly.
1
Use the control stick to move the cursor over the desired clip.
2
Press the control stick.
A light blue frame and
are displayed on the clip where the cursor is put. This indicates that it is selected.
3
To select additional clips, repeat steps 1 to 2.
It is possible to display only the selected clips on the thumbnail screen for playback.
@
NOTE
t While holding down the <SHIFT> button, press the control stick upward/downward to move the cursor to the first/last clip.
t After selecting a clip, move the cursor to another clip and press the control stick while pressing the <SHIFT> button to select all clips from the
previously selected clip to the one at cursor position.
t As clips are selected, the number of selected clips displayed on the lower right corner of the screen changes according to the selection.
Deselecting clips
1
Move the cursor to the selected clip and press the control stick.
This deselects the clip.
@
NOTE
t While holding down the <SHIFT> button, press the <EXIT> button to deselect all the clips at once.

Setting thumbnail screen display

You can customize the thumbnail screen according to usage.
1
Select [THUMBNAIL SETUP] in the main menu → [CLIP].
The thumbnail setting items ([INDICATOR], [DATA DISPLAY], [THUMBNAIL SIZE], [PB POSITION], [PROPERTY DISP.]) are displayed. For details,
refer to "Setting items that display properties" (page 102).
Setting thumbnails to be displayed
1
Select [REPOSITION] in the main menu → [CLIP].
2
Use the control stick to move the cursor to the size of the thumbnail you want to display.
3
Press the control stick.
Setting the thumbnail size
You can customize the thumbnail size.
1
Select [THUMBNAIL SIZE] in the main menu → [CLIP] → [THUMBNAIL SETUP].
2
Use the control stick to move the cursor to the type of the clip you want to display.
3
Press the control stick.
Chapter 5 Playback — Thumbnail operations
Setting example for thumbnail screen ([INDICATOR])
– 101 –

Advertisement

Table of Contents
loading

Table of Contents