Table of Contents
Advertisement
■ Description in a definition file
1. Section
The table below shows a list of section names you can define for this function and an
explanation of the message you define for each section.
Section name
[PS-FAN]
[FT-FAN]
[CPU-FAN]
[TEMP]
[HDD1-SMART]
[HDD2-SMART]
[HDD1-OFFLINE]
[HDD2-OFFLINE]
[HDD1-OVERRUN]
[HDD2-OVERRUN]
[DIMM1-ERR]
[DIMM2-ERR]
(*) D Model only.
2. Keys
For a key, specify the line number of a line displayed as a part of the popup message.
In this function, you can use the keys "Line1" through "Line5" for each section.
If you specify Line6 and so on for keys, those keys are ignored.
3. Values
Specify one line of message displayed as a part of the popup message for a value.
For each key, a maximum of 50 bytes of characters (up to 25 double-byte characters)
can be assigned. If you specify more than 50 bytes of characters, the characters at the
51th byte and after are ignored.
If the line includes space characters, the whole value should be enclosed in double
quotation marks (""). If the value is empty, it is treated as a newline character.
Table 3-2 Section Names and Defined Messages
A message displayed when a PS fan failure is detected.
A message displayed when a front fan failure is detected.
A message displayed when a CPU fan failure is detected.
A message displayed when an abnormal temperature inside the chassis is
detected.
A message displayed when a drive failure prediction (SMART) is detected
for the drive bay1.
A message displayed when a drive failure prediction (SMART) is detected
for the drive bay2.
A message displayed when a RAID failure is detected due to a drive failure
at drive bay1. (*)
A message displayed when a RAID failure is detected due to a drive failure
at drive bay2. (*)
A message displayed when the drive power-on (=used) hours exceeds the
determined value for the drive bay1.
A message displayed when the drive power-on (=used) hours exceeds the
determined value for the drive bay2.
A message displayed when an error correction is detected frequently in
DIMMA.
A message displayed when an error correction is detected frequently in
DIMMB.
3. SETTING UP THE RAS FEATURE
Defined message
3-15
Advertisement
Table of Contents
