Memory Dump Confirmation Messages - Hitachi HF-W2000 58 Instruction Manual

8. MAINTENANCE OPERATIONS

8.2.1 Memory dump confirmation messages

If the capacity of the physical memory exceeds the capacity of the memory dump file or the virtual memory due to,
for example, newly added physical memory, or if a complete memory dump cannot be collected because the
memory dump settings have changed, this equipment displays the following message and records an event in the
event log:
If you want to use the system with the memory dump setting recommended for this equipment, click Yes to close
the message box. The memory dump and virtual memory settings are updated and an area for saving the memory
dump is allocated automatically as required.
NOTE
• When the message box above is displayed, sometimes an information log entry with Event ID 26 is recorded in
the event log.
• If you do not want to use the system with the memory dump setting recommended for this equipment, click No
to close the message box. This message box will then no longer be displayed.
If the following message is displayed thereafter to prompt you to restart the system, click OK to close the message
box, and then restart the system.
8-8