Hitachi HF-W2000 58 Instruction Manual page 206

• [RAID condition] section
This section shows the RAID status. The following table describes the items in this section. This section is
available only when using the B model.
Output item
Arrayxx
: ( ,
yy zz ww
Status
RAID level: vv
• [Drive condition] section
This section shows the status of a drive. The following table describes the items in this section.
Display item
Drive bayxx
Type: ww
Status: yy
Used hours: zz
xx
yy
)
Media Error
zz
ww
Media
Error
vv
xx
ww
yy
zz
Description
Shows the number of the RAID array.
Shows the RAID status
Optimal: Normal status
Degrade: Abnormal status
Unknown: Unknown status
Indicates that a task has started and is in progress.
Rebuild: Rebuilding
Completion rate of a task in progress. Shown only when the
task has started.
Shown only when a media error is detected during a task.
Displays the RAID level as follows:
1: RAID1
Description
Shows the drive bay number.
Shows the drive type.
Shows the status of the drive.
Healthy: Normal
Not Connected: No disks are installed.
Smart Detected: SMART is detected.
Offline: Offline (B model only)
Rebuild: Rebuilding (B model only)
Incomplete data: Data mismatch (B model only)
Overrun: Power-on (used) hours exceeded the threshold.
Unknown: Unknown status
Smart Detected, Overrun: SMART is detected,
and the power-on hours exceeded the threshold.
Shows the drive power-on (used) hours.
8-23
8. MAINTENANCE OPERATIONS