Installing And Removing A Dust Filter; Figure 6-9 Removing The Dust Filter; Figure 6-10 Installing A Dust Filter - Hitachi HF-W2000 58 Instruction Manual

6. INSPECTION AND MAINTENANCE

6.3.8 Installing and removing a dust filter

Install a dust filter for use with the equipment. Not doing so allows dust into the equipment,
which might result in a short circuit fire.
(1) Before installing or removing a dust filter
•
Before starting work, see 6.3.2 Before installing or removing components.
(2) Removing a dust filter
[1] Loosen the screw for the dust filter cover.
[2] Remove the dust filter cover from the equipment.
[3] Remove the dust filter from the dust filter cover.
Dust filter cover
(3) Installing a dust filter
Follow the procedure described in (2) Removing a dust filter in reverse to install a dust filter. Insert the protrusions
on the dust filter cover into the slits as shown in the following figure.
[1] Dust filter cover screw (1)

Figure 6-9 Removing the dust filter

Dust filter cover

Figure 6-10 Installing a dust filter

WARNING
Slits
Protrusions
6-18