6.3.9 Installing and removing the vertical stand
The equipment might cause injury if it falls or is dropped off of a desktop when placed
vertically. Use the vertical stand provided with the equipment, and place the equipment with
the vertical stand on a level surface.
(1) Before installing and removing the vertical stand
•
Before starting work, see 6.3.2 Before installing or removing components.
•
Disconnect all cables connected to the equipment.
•
Do not subject the equipment to shocks.
(2) Installing the vertical stand
Install the vertical stand to the equipment securely by using the screws provided for the vertical stand.
(3) Removing the vertical stand
Follow the procedure described in (2) Installing the vertical stand in reverse to remove the vertical stand. Store the
removed vertical stand and screws in a location where they will not become lost.
CAUTION
Figure 6-11 Installing the vertical stand
6-19
6. INSPECTION AND MAINTENANCE
Securing screws (4)