1. GETTING STARTED
Table 1-2 Dimensions, operation and service clearance, and installation clearance
Dimensions (mm)
Height
Width
93
325
• When you operate the equipment or do maintenance work, provide sufficient clearance, as shown in Figure 1-4.
• The equipment is cooled by fans. The intake holes are on the front and the exhaust holes are on the rear and
sides. Ensure that air flow is not blocked. In particular, leave sufficient clearance in the front (50 mm) and in
the rear (100 mm). (This includes the clearance required for routing cable connectors for the rear side.)
10 mm
Horizontal installation (top view)
Operation and
service clearance (mm)
Depth
Front
Rear
356
500
600
200 mm
Figure 1-4 Operation and service clearance (top view)
50 mm
Rear side
100 mm
Figure 1-5 Installation clearance
Installation clearance (mm)
Left
Right
Front
200
200
50
500 mm
Front side
Rear side
600 mm
10 mm
10 mm
Vertical installation (top view)
1-14
Rear
Left
Right
100
10
200 mm
50 mm
10 mm
Rear side
100 mm
10