Shutting Down The Equipment - Hitachi HF-W2000 58 Instruction Manual

2.3 Shutting Down the Equipment

When shutting down the equipment, first verify that no other users are using the equipment and that no background
programs are running. Then perform the following actions:
• Stop application programs.
• Shutdown the OS.
The specific procedure for stopping an application program differs depending on the application. For more
information, see the manual of the relevant application.
If the OS is Windows
To shutdown the OS, click the Start button at the bottom-left corner of the screen to open the Start menu. Then,
click Power and Shutdown. After the OS shutdown, the power automatically turns off, and only the auxiliary
power supply remains on (standby mode). (In this mode, the status lamp (STATUS) is off and the standby lamp
(STBY) is on.)
If the OS is Windows
If the normal shutdown process cannot be performed (for example, a shutdown request cannot be accepted due to a
system deadlock), open the protective cover on the upper-right part of the front panel, and then press and hold the
power switch for at least four seconds. The power turns off and the equipment goes into standby mode. If you turn
off the power by pressing and holding the power switch for at least four seconds, you cannot turn on the power via
a LAN the next time that you turn the power on. Do not turn off the power this way except in emergencies. (See
2.7 Controlling the Power By Using a LAN.) For information about how to collect a memory dump, see 8.2
Collecting Memory Dumps.
® ®
10 or Windows Server
® ®
10 or Windows Server
2016:
2016:
2-3
2. OPERATION