8.4.4 RAS information display command (getrasinfo)
Name
getrasinfo - Displays the status of the equipment, such as the status of the fan and the temperature inside the
chassis, as well as the configuration information of the RAS software
Syntax
getrasinfo [/status | /setting] [/e file-name]
Functionality
The getrasinfo command displays the current status of the equipment, such as the status of the fan and the
temperature inside the chassis, as well as the configuration information of the RAS software, at the command
prompt. This command can also store the output to a specified file in text format.
The following options are available for this command. If neither the /status nor the /setting option is used,
the command displays both information about the equipment and the settings of the RAS software.
/status: Displays the current status of the equipment, including the status of the fan and the temperature inside
the chassis.
/setting: Displays the configuration information of the RAS software.
/e file-name: The output is not displayed at the command prompt, but is instead stored in the file specified by the
file name, in text format.
Table 8-8 shows the information displayed by the getrasinfo command.
Table 8-8 Information displayed by the getrasinfo command
Status of the equipment
RAS software settings
Item
• Fan status
• Temperature status
• RAID status (B model only)
• Drive status
• Memory status
• Automatic shutdown settings
• Watchdog timer settings
• Self-Monitoring, Analysis and Reporting Technology
(SMART) settings
• Drive usage monitoring settings
• Digital LEDs for status indications settings
• Pop-up display settings
Description
8-19
8. MAINTENANCE OPERATIONS