Hitachi HF-W2000 58 Instruction Manual page 61

1. GETTING STARTED
Connecting to an outlet
Fully and securely insert the plug of the power cord of this equipment into an outlet with a grounding pole that is
#1
properly grounded.
#1: If you have no choice other than to use an outlet without a grounding pole that is properly grounded, use a 3-pole
to 2-pole conversion adapter and connect the green ground line from the adapter to the ground of the outlet.
Verify the proper functionality of the 3-pole to 2-pole conversion adapter before using it.
NOTE
• The power cord that comes with the equipment is rated at an input voltage of 125 V AC. When using this
equipment at voltages over 125 V AC, prepare a power cord that is compatible with the input voltage to be used.
• If you are using a power cord clamp to prevent accidental disconnection, allow for extra length in the power
cord around the connector when you secure the cord, in order to allow the cord to be disconnected in an
emergency. Alternatively, install an emergency circuit breaker at the outlet.
Use a power cord with a 2-pole plug
with a grounding pole.
1-18