External Interface Cable Length Specifications - Hitachi HF-W2000 58 Instruction Manual

5.8.3 External interface cable length specifications

(1) External interface cable length specifications
The recommended maximum cable length for each interface of this equipment is as follows:
No. Connector name
1 Analog RGB port
2 DVI-D port
3 DisplayPort
4 LAN port
5 External contact port
6 Serial port (COM)
7 Front USB 2.0 (2 ports)
8 Rear USB 3.0 (6 ports)
9 Audio (LINE IN/LINE OUT)
Connected devices might not work properly depending on the device. Verify proper operation of the device before
using it.
Equipment operation cannot be guaranteed when used in combination with extension or switching devices. Verify
the correct operation of the equipment in advance.
Maximum cable length (m)
3
3
3
100
30
15
3
2
2
5-29
5. SPECIFICATION
Notes
UTP Category 5e or better
For information about the cable
specifications, see 5.8.2 (3).
Use a shielded cable.
Use a USB 2.0 compliant shielded cable. If
you use an extension cable, connected USB
devices might not work properly.
Depending on the connected device, use a
USB 3.0 compliant shielded cable or a USB
2.0 compliant shielded cable.
If you use an extension cable, connected
USB devices might not work properly.