Maintenance Operation Commands; Table 8-3 Maintenance Operation Commands - Hitachi HF-W2000 58 Instruction Manual

8. MAINTENANCE OPERATIONS

8.4 Maintenance Operation Commands

This section explains how to use the maintenance operation commands. These commands are used when problems
occur in the equipment and during preventive maintenance. When using these commands, run them from the
command prompt.
Table 8-3 shows a list of maintenance operation commands.
Command name
logsave
mdump
createdmp
getrasinfo
The manufacturer provides services to analyze the data collected by these maintenance operation commands, such
as memory dump files and data for failure analysis, for a fee.

Table 8-3 Maintenance operation commands

Used to collect data for preventive maintenance or data for post-failure analysis during
preventive maintenance, or when problems occur.
Used to copy a memory dump file to portable media when a memory dump is collected due
to a bug check.
Used to reserve disk space for a memory dump file when a message is displayed indicating
that the space available for the memory dump file is insufficient.
Used for checking the status of the equipment, such as the status of the fan and the
temperature inside the chassis.
Feature
8-12