Figure 1-8 Hardware Connections - Hitachi HF-W2000 58 Instruction Manual

Connect hardware based on the connection example shown in the following figure.
Connect the display, keyboard, and mouse to this equipment, and then plug the power cord into an outlet.
Power cord for this equipment
Display power cord
#1
Display
Keyboard
#1: For information about the naming of the user input module and how to operate and adjust the device, see the
user's manual that comes with the device.
#2: For information about the length of each connection cable, see 5.8.3 External interface cable length
specifications. The mouse and keyboard interface cables must be directly connected to this equipment. Do not
use extension cables for these cables. If you use extension cables, the mouse or keyboard might not work
properly.
#3: When connecting USB devices to the USB connectors, note the orientation of the connectors. In addition, note
that a USB cable might disengage from the connector if the cable comes into contact with an object
unexpectedly, because USB ports do not typically feature a mechanism to secure the cable in the port. Secure
USB cables as necessary when installing this equipment.
Note: To ensure conformity with EMC standards (VCCI, FCC, and CE), use shielded cables for the interface cables
connected to the equipment (the display interface cable, keyboard interface cable, and mouse interface cable).
#2
Display interface cable
Keyboard interface cable
Mouse

Figure 1-8 Hardware connections

(Connection side for this equipment)
#2
Mouse interface cable
1-17
1. GETTING STARTED
#2, #3
USB 3.0 ports
#2