Hardware Connection - Hitachi HF-W100E Instruction Manual

1. GETTING STARTED

1.6 Hardware Connection

 Do not route the interface cables, etc. (including cables for other devices such
as a PC) near the power cable. If you do, a failure or malfunction of the
equipment may result.
 Do not connect / disconnect the interface cable while this equipment and
connected equipment are turned on. Failure of the equipment may result due
to short circuit of power supply voltage. If the interface cable is disconnected
while this equipment is on, shut down the OS and unplug the power cable
from the DC power connector. If you unplug the power cable suddenly from
the DC power connector without shutting down the OS, the contents of the file
may be crashed.
 When you connect a cable for external contacts, make sure you connect the
cable to a connector for the external contacts. If you connect the cable to the
wrong connector, it may cause failure of the equipment.
Before you connect hardware, carefully read SAFETY INSTRUCTIONS in this document and
fully understand the contents.
NOTICE
1-12