Hitachi HF-W100E Instruction Manual page 142

5. SPECIFICATION
(*3) The default values are as follows. It depends on OS.
Setting items
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
Boot Option #8
Boot Option #9
Boot Option #10
(5) Restoring the default settings
When you want to restore all items in the setup menu back to the default settings,
follow the procedure below:
1. Start the setup menu. (See "5.3 BIOS Setup (1) Starting the setup menu".)
2. Open Save & Exit in the top menu.
【 In the case of Windows® Embedded Standard 7】
Move the cursor to Restore Defaults Windows 7 and press Enter.
【 In the case of Windows® 10】
Move the cursor to Restore Defaults Windows 10 and press Enter.
The message "Load Optimized Defaults?" is displayed.
3. Select "Yes" and press Enter.
4. Open Save & Exit in the top menu again. Move the cursor to Saving Changes and Exit.
Press Enter. The message "Save configuration and reset?" is displayed.
5. Select "Yes" and press Enter.
This completes the procedure.
Windows® Embedded Standard 7
USB Floppy
UEFI USB Floppy
USB CD/DVD
UEFI USB CD/DVD
USB Key
UEFI USB Key
Hard Disk
UEFI Hard Disk
USB Hard Disk
UEFI USB Hard Disk
5-10
Windows® 10
UEFI USB Floppy
UEFI USB CD/DVD
UEFI USB Key
UEFI Hard Disk
UEFI USB Hard Disk
－
－
－
－
－