Overview Of Restoration Procedure - Hitachi HF-W100E Instruction Manual

7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD

7.1 Overview of Restoration Procedure

This section describes the overview of the procedure to restore the system drive back to the
factory-shipped condition when you discontinue the system you have built. After you restore
the contents of the system drive back to the factory-shipped condition, follow the procedure
described in "CHAPTER 3 SETUP" to set up the OS.
The following is a rough flow chart of the procedure.
Preparation
Restoring the factory-shipped condition
Setting up the OS
For details, see "7.2 Preparation".
・This shows a list of the items you need to prepare and
the items you need to decide or check before you start
restoration work.
For details, see "7.3 Restoring the System Drive Back to
the Factory-Shipped Condition".
・The contents of the system drive are restored back to
the factory-shipped condition.
・The procedure depends on the OS.
Windows® Embedded Standard 7: about 15minutes
Windows® 10: about 25minutes
For details, see "CHAPTER 3 SETUP".
7-2