Since The Control Panel Is Displayed, And Click System And Security - Hitachi HF-W100E Instruction Manual

<Required actions>
• Do not change the factory default setting, "HF-W Power Settings", for the power plan.
Furthermore, do not change "Turn off hard disk after" setting from "0". If you want to
confirm the current setting for power plan and "Turn off hard disk after" setting, follow
the procedure below.
(The display image assumes Windows® Embedded Standard 7 but it is similar under
other OS.)
 Confirmation procedure of the current power plan settings
1. Click Start and click Control Panel.

2. Since the Control Panel is displayed, and click System and Security.

3. Click Power Options and display Power Options window.
・Confirm that HF-W Power Settings radio button is selected under Preferred
plans.
C-12