Hitachi HF-W100E Instruction Manual page 26

3. DISPLAY SCREEN
<Specifications>
• Before you set up the screen, terminate all running application software.
• When you change connections to switch between single- and multi- display
configurations, turn off the power to the equipment, change the connection of display
cables, turn the power back on, and then set up the screen configuration.
• When you change the connection configuration for the displays, reconfigure the screen
settings accordingly.
• Depending on application software, the screen may flicker and video playback may not be
smooth.
• The multi-stream function (daisy chain) of DisplayPort is not supported.
• If a display unit connected with DisplayPort is turned off, the display cannot be detected.
(The display image assumes
Windows® Embedded Standard 7
C-6
but it is similar under other OS.)