Configuring Basic Settings After Os Setup; Basic Settings For Windows® Embedded Standard 7 - Hitachi HF-W100E Instruction Manual

3.2 Configuring Basic Settings after OS Setup

3.2.1 Basic settings for Windows® Embedded Standard 7
This section describes the basic settings procedure of the preinstalled Windows® Embedded
Standard 7.
Perform this procedure as needed after the setup of OS according to "3.1 Setup Procedure
when You Turn on the Power for the First Time".
3.2.1.1 Outline of basic settings procedure
Setting up the network environment
Setting up the screen
Setting up auto-update
Only when changing display language
Change display language
Only when using the Internet Exp1orer 11
Internet Explorer 11 setup procedure
See "2.7 Setting Up the LAN Interface".
See "2.8 Setting Up the Screen".
See "3.2.1.2 Setting up Auto-update".
・The procedure takes about 5 minutes.
See "3.2.1.3 Setting display language".
See "3.2.1.4 Internet Explorer 11 setup
procedure" .
3-7
3. SETUP