Hitachi HF-W100E Instruction Manual page 90

3. SETUP
3.2.1.3 Setting display language
Windows® Embedded Standard 7 preinstalled on this equipment adopts Windows®
multilingual user interface (MUI), and displays the display language of Windows® itself as
English, Japanese, Chinese(simplified), Korean, Portuguese, and Thai.
●To change the display language to "English" or "Japanese":
Since the language packs are pre-installed, switch the display language according to
"(1) Switching display language".
●To change the display language to a language other than "English" or "Japanese":
The language packs are stored on the last disc of the recovery DVD. Install language packs
and switch display languages according to "(2) Installing language pack".
(1) Switching display language
Follow the steps below to change the display language.
1. Click Start and then click Control Panel.
2. When you select Change Display Language from Clock, Language, and Region,
the "Region and Language" window opens.
3. Select the Formats tab and click the language you want to display from Format.
4. Select the Location tab and click the place you want to display from Current location.
5. Select the Keyboards and Languages tab and click the language you want to display
from Choose a display language.
6. When you click Change keyboards on the Keyboards and Languages tab, the "Text
Service and Input Language" window will be displayed, so if necessary, select the
environment you want to use from "Default input language", "Installed service" click
OK.
7. When you finish setting the "Region and language" window, click OK.
8. When you change the display language, the "Change Display Language" dialog box is
displayed. If you log off, click the "Log off Now". If you log off later, click the "Cancel".
Please respond as necessary.
3-10