Starting The Equipment - Hitachi HF-W100E Instruction Manual

2. OPERATION

2.2 Starting the Equipment

Follow the procedure below to start the equipment:
【When you turn on the power for the first time】
1. Turn on the power to the display.
2. When using the optional AC adapter and the attached power cable, connect it to this
equipment and then plug the power cable attached the AC adapter into an outlet.
When not using the optional AC adapter and the attached power cable, the user
independently prepares a DC power supply unit and a DC power cable.
And then plug the power cable after connecting to this equipment.
When plugging the power cable, the equipment turns on and the power lamp (
lights up in "green".
3. After the OS starts, set up the equipment according to "3.1 Setup Procedure when You
Turn on the Power for the First Time". (You need to follow this procedure only once
for the first time when you start the equipment after you purchase the equipment.)
【From the second time on, when starting the equipment】
Since the startup operation differs depending on the procedure after shutdown, start up the
equipment with either Step 1 or Step 2 below.
1. When the main power OFF state (power lamp is off), start up the equipment by
performing the operation "See【When you turn on the power for the first time】
Step 2".
2. When the standby state (power lamp is lit orange), press the power button (See "1.4
Name and Function of Each Part") of this equipment to start up.
3. If you do either Step 1 or Step 2, the power turns on and the power lamp (
in "green".
After the above steps are complete, the equipment automatically goes through the startup
process until the sign in screen appears.
For information about how to control the power using the LAN, see "2.6 Controlling the
Power Using the LAN".
2-2
)
) lights up