Hitachi HF-W100E Instruction Manual page 85

● Windows® 10 setup procedure
Perform the following procedure to set up Windows® 10.
1. Remove the external storage device from the equipment if it is connected to this
equipment.
2. Turn on this equipment.
Windows starts running and setup is prepared.
Then, the message "Setup is installing devices. Please wait..." appears, indicating that
installation of the device driver is in progress.
• This processing may take several minutes. Please wait until it is completed.
• After the OS reboots, Setup goes on.
3. The Hi there window opens.
Select the language and setting item to use, and click Next.
(It should be noted that the language used in the window is changed to the specified
display language immediately after you select the language.)
< NOTE >
・ The default setting of the time zone is "(UTC + 09: 00) Osaka, Sapporo,
Tokyo". When you change the time zone, the system time is changed from the
time zone of "(UTC + 09: 00) Osaka, Sapporo, Tokyo" by the time difference.
・ If you select Japanese, RAS software for Japanese environment will be
installed, so if you have the possibility of switching to a language other than
Japanese for overseas later, select English and select the English version of
RAS software Please be sure to install it.
4. The Here's the legal stuff window opens.
• Check the contents, and then click Accept.
5. The Get going fast window opens.
• Click Customize.
• Select On or Off for settings as needed, and then click Next.
6. The Create an account for this PC window opens.
• Type a user name in Who's going to use this PC?.
• Type a password in Enter password in Make it secure.
• Retype the password in Re-enter password.
• Type a hint of password in Password hint.
• Click Next.
3-5
3. SETUP