Figure 6-5 Fixing A Displayport Cable - Hitachi HF-W100E Instruction Manual

6. CHECKUP AND MAINTENANCE
(2) Securing a DisplayPort cable
1. See Figure 6-5 and secure the DisplayPort / USB removal prevention fittings to the
equipment with screws (M3 screw).
2. Attach the DisplayPort cable to the equipment and attach the Cable band (Prepared by
users).
(3) Removing the DisplayPort cable
Follow the procedure described in "(2) Secureing a DisplayPort cable" in reverse to remove
the DisplayPort cable.
Also, since you can not reuse the cable band used once, prepare a new cable band for use
when the cable band is used again.
Fixing screw (M3 screw)

Figure 6-5 Fixing a DisplayPort Cable

6-10
Cable band
(Prepared by users)
DisplayPort / USB
removal prevention
fittings