Table of Contents
Advertisement
(4) Details of the setup menu
The following tables show the details of the items you can set up in each menu.
Top menu
Main
System Date
System Time
Advanced
ACPI Settings
Super IO
Configuration
CPU
Configuration
PPM
Configuration
SATA
Configuration
CSM
Configuration
Setting item
Enable Hibernation
Wake On LAN Control on S5
Wake On RI Control on S5
Resume On RTC Alarm
Serial Port A
Serial Port
Configuration
Change Settings
RS422/485 Terminator Control
Mode Select
Digital I/O
Digital Output 0
Configuration
Digital Output 1
Digital Output 2
Digital Output 3
Digital Output 4
Digital Output 5
Digital Output 6
Digital Output 7
Execute Disabled Bit
Intel Virtualization Technology
EIST
CPU C state Report
S0ix
Serial-ATA(SATA)
SATA Test Mode
SATA Speed Support
Serial-ATA Port 0
Serial-ATA Port 1
CSM Support
Network
Storage
Other PCI devices
Default value
Disabled
Enabled
Disabled
Disabled
Enabled
IO=3F8h;IRQ=4;
Disabled
RS-232
Output High
Output High
Output High
Output High
Output High
Output High
Output High
Output High
Enabled
Enabled
Disabled
Disabled
Disabled
Enabled
Disabled
Gen2
Enabled
Enabled
Enabled
(In the case of
Windows® Embedded
Standard 7)
Disabled
(In the case of
Windows® 10)
Do not launch
Legacy
Legacy
5-7
5. SPECIFICATION
（1/3）
Note
When you set the system up
for the first time, be sure to
configure these two items.
Do not change this setting.
You can change the serial port
setting. See"5.2 Serial Port
Settings"
Change initial value of output
of GPIO.
Do not change this setting.
Do not change this setting.
(Note) It is not displayed in
Windows® 10.
Advertisement
Table of Contents
