Figure 6-3 Securing A Usb Cable To The Front Of The Equipment - Hitachi HF-W100E Instruction Manual

・Securing a USB cable to the front of the equipment
(2) Securing a USB cable to the front of the equipment
1. See Figure 6-3 and secure the USB removal prevention fittings to the equipment with
screws (M3 screw).
2. Attach the USB cable to the equipment and attach the Cable band.

Figure 6-3 Securing a USB Cable to the Front of the Equipment

(3) Removing the USB cable on the front of the equipment
Follow the procedure described in "(2) Securing a USB cable to the front of the equipment"
in reverse to remove the USB cable.
Also, since you can not reuse the cable band used once, prepare a new cable band for use
when the cable band is used again.
< NOTE >
When attaching the securing cable band, see the figure below and install it by the
installation method matching the number of USB cables to be attached to the
equipment.
USB cable 3 fixed
Cable band
USB cable 2 fixed
6-7
6. CHECKUP AND MAINTENANCE
USB removal
prevention fittings
Fixing screw (M3 screw)
USB cable 1 fixed
Cable band