(a) Horizontal Installation
(b) Vertical Installation
Make sure to install this equipment on the vertical mounting bracket with fasten
screw, when you use this equipment in a vertical orientation. If you not, injury may
result due to fall or fall down the equipment
Make sure to confirm the installation work has been done securely. Injury may
result due to drop the equipment since installing failure or loosing screw.
Mounting bracket for Vertical Installation Use a steel plate.
The thickness must be 2mm or more. (Prepared by users)
< NOTE >
・When installing the equipment, please install so that vibration and impact
applied to the equipment fall within the specification values of the equipment,
see "1.5.1 Environment".
Figure 1-5 Exterior View (Horizontal Installation)
CAUTION
Figure 1-6 Exterior View (Vertical Installation)
Please fix the above-mentioned four
locations with screws.
Use the attached fixing screw (M4
screw) for the screw to be fixed.
1-11
1. GETTING STARTED