9. TROUBLESHOOTING
(3) The BIOS setup menu cannot be opened.
Possible cause
Keyboard input is not accepted.
Action
1. Disconnect the keyboard cable and securely reconnect it to ensure a stable connection.
2. Connect the keyboard cable to another port.
(4) The remote power-on feature cannot be activated through the RAS external contact.
Possible cause
The remote power-on feature is disabled.
Action
1. Enable the remote power-on feature by referring to 6.6 Enabling the Remote Power-On Feature.
(5) Wake-on-Lan (WOL) cannot be used.
Possible cause
The WOL feature is not enabled.
Action
1. Check which OS is being used. If the OS specifications do not support the WOL feature, the WOL feature is
unavailable.
2. Enable the WOL feature by referring to 2.7.1 Enabling the Wake-on-LAN (WOL) feature.
(6) If an extension board is installed, the equipment does not start.
Possible cause
A connection failure of an extension board or an address space conflict with an onboard device is possible.
Action
1. Turn off the power, remove the extension board, and then reinstall the extension board.
2. If the problem cannot be resolved by performing step 1, a failure on the extension board possible. In this case,
take action by referring to the documentation of the extension board.
9-6