Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Installation
Mounting to a Solid Wall or Ceiling
The DNH-200 can be mounted on a solid wall or in an EIA standard 19-inch rack, which can
be placed in a wiring closet with other equipment.
You can either hang the unit on the wall by using the wall mount keyholes on the rear of the
unit or by using the supplied mounting bracket.
The following procedure explains how to use the keyholes.
1.
Use the wall mount template to mark the screw positions on the wall.
2.
Drill the 2 supplied wall anchors into the wall at the marked positions and screw the 2
supplied screws into them. Make sure they stand out ~6.7mm.
3.
Hang the device on the wall by aligning the key holes with the mounted screws.
6.7 mm ± 2.0
12
Hardware Installation
Advertisement
Table of Contents
