Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Settings
The Settings page allows you to configure settings such as access ports of the web
management and alert events and contains these tabs: General, Connection, Rest API, and
Alerts.
General
The General tab allows you to set the Live Packet Interval. Click the menu to select the live
packet interval in minutes (range: 1-5 mins). It determines how often the managed APs
should report their status and related information to the Hub.
Click Save to save the values and update the screen.
Connection
The connection tab provides connection settings such as the network address and port
number for communication. Navigate to System > Settings and click the Connection tab. The
following can be configured for device connection:
Device Access Address
Device Access Port
Click Save to save the values and update the screen.
REST API
The API key is required for sending requests about the wireless networks managed by the
Hub. Navigate to System > Settings and click the REST API tab. Configure the following to
The current IP address of Nuclias Connect Server
application is displayed. Click Other to modify it. If this IP
is changed, you need to perform AP discovery gain.
Enter the port number for communication between an AP
and the Hub. The default value is 8443. For remote AP
management behind a firewall or router, use this port
information for setting port forwarding.
85
AP Network
Advertisement
Table of Contents
